selective laser melting

 

  • [57] SLM is often a more sustainable option due to decreased raw material use, less complex tool use, lightweight part potential, near-perfect final geometries, and on-demand
    manufacturing.

  • It is not only the Print operation and orientation that provides a change in material properties, it is also the required post processing via Hot Isostatic Pressure (HIP)
    Heat Treat and shot peen that change mechanical properties to a level of noticeable difference in comparison to equiaxed cast or wrought materials.

  • Depending on the part made and its intended use, SLM can help make more lightweight parts with complex dimensions which reduce both energy intensive post-processing machining
    such as EDM or a computer numerical control (CNC) machining and decrease part weight.

  • “[61] Metallic support structure removal and post processing of the part generated may be a time-consuming process and require the use of machining, EDM and/or grinding machines
    having the same level of accuracy provided by the RP machine.

  • [6] Process Selective laser melting is able to process a variety of alloys, allowing prototypes to be functional hardware made out of the same material as production components.

  • Additionally, wear properties are typically better as seen with the studies done on additive Inconel 718 due to surface condition; the study also demonstrated the laser power’s
    influence on density and microstructure.

  • Since the components are built layer by layer, it is possible to design complex freeform geometries, internal features and challenging internal passages that could not be
    produced using conventional manufacturing techniques such as casting or otherwise machined.

  • Defect formation Despite the large successes that SLM has provided to additive manufacturing, the process of melting a powdered medium with a concentrated laser yields various
    microstructural defects through numerous mechanisms that can detrimentally affect the overall functionality and strength of the manufactured part.

  • [52] What sets SLM apart from other 3D printing process is the ability to fully melt the powder, rather than heating it up to a specific point where the powder grains can
    fuse together, allowing the porosity of the material to be controlled[citation needed].

  • Tests by NASA’s Marshall Space Flight Center, which is experimenting with the technique to make some difficult-to-fabricate parts from nickel alloys for the J-2X and RS-25
    rocket engines, show that difficult to make parts made with the technique are somewhat weaker than forged and milled parts but often avoid the need for welds which are weak points.

  • One such example is the development of secondary phase precipitates within the bulk structure due to the repetitive heating within solidified lower layers as the laser beam
    scans across the powder bed.

  • [46] Industry applications[edit] • Aerospace – Air ducts, fixtures or mountings holding specific aeronautic instruments, laser-sintering fits both the needs of commercial
    and military aerospace • Energy – Laser-melting can be used to produce innovative pump impellers, high pressure reactors and hard-to-find spare parts • Manufacturing – Laser-sintering can serve niche markets with low volumes at competitive
    costs.

  • Selective laser melting (SLM) is one of many proprietary names[1] for a metal additive manufacturing (AM) technology that uses a bed of powder with a source of heat to create
    metal parts.

  • [citation needed] Independent of the material system used, the SLM process leaves a grainy surface finish due to “powder particle size, layer-wise building sequence and [the
    spreading of the metal powder prior to sintering by the powder distribution mechanism].

  • SLM allows parts to be built additively to form near net shape components rather than by removing waste material.

  • The electric use is often the most energy intensive part of the printer, as the high power lasers, chillers, configurations, and part separation all contribute to this.

  • “[44] The 3D printing process for the SuperDraco engine dramatically reduces lead-time compared to the traditional cast parts, and “has superior strength, ductility, and fracture
    resistance, with a lower variability in materials properties.

  • [60] Constraints The aspects of size, feature details and surface finish, as well as print through dimensional error[clarification needed] in the Z axis may be factors that
    should be considered prior to the use of the technology.

  • The exception to this is in research environments where the machine is not constantly used and use is more infrequent, in this case, the embodied energy from primary processing
    and manufacturing is dominant.

  • SLM produces fully dense durable metal parts that work well as both functional prototypes or end-use production parts.

  • Ultimately, the total embodied energy considering all parts made is dependent on many factors but is almost always dominant during the printing phase and more specifically
    during long idle times and post-processing part removal through EDM.

  • Therefore, SLM can produce stronger parts because of reduced porosity and greater control over crystal structure, which helps prevent part failure[citation needed].

  • Another name for selective laser melting is direct metal laser sintering (DMLS), a name deposited by the EOS brand, however misleading on the real process because the part
    is being melted during the production, not sintered, which means the part is fully dense.

  • [34] This technology is used to manufacture direct parts for a variety of industries including aerospace, dental, medical and other industries that have small to medium size,
    highly complex parts and the tooling industry to make direct tooling inserts or those requiring short lead times.

  • The laser energy is intense and focused enough to permit full melting (fusion) of the particles to form a solid structure.

  • [32] The cellular structure is considered to be the main cause of the differences in deformation behavior, especially during the first creep stage, primarily because it limits
    the work-hardening capacity of the material.

  • The technology is used both for rapid prototyping, as it decreases development time for new products, and production manufacturing as a cost saving method to simplify assemblies
    and complex geometries.

  • [43] The ability to 3D print the complex parts was key to achieving the low-mass objective of the engine.

  • [32] Applications The types of applications most suited to the selective laser melting process are complex geometries and structures with thin walls and hidden voids or channels
    on the one hand or low lot sizes on the other hand.

  • Since the components are built layer by layer, it is possible to design internal features and passages that could not be cast or otherwise machined.

  • These defects can arise from not using a laser source with adequate power or scanning across the powdered surface too quickly, thereby melting the metal insufficiently and
    preventing a strong bonding environment for solidification.

  • Selective laser melting is very useful as a full-time materials and process engineer.

  • This advancement is very important to both material science and the industry because it can not only create custom properties but it can reduce material usage and give more
    degrees of freedom with designs that manufacturing techniques can’t achieve.

  • Cracking is another mechanical defect in which low thermal conductivity and high thermal expansion coefficients generate sufficiently high amounts of internal stresses to
    break bonds within the material, especially along grain boundaries where dislocations are present.

  • [59] Another example is the 1kg weight reduction through a hydraulic valve body which estimates a saving of 24,500L of jet fuel and 63 tons of CO2 emissions from a lightweight
    design and decreased material used compared to traditional manufacturing methods.

  • With multiple alloying elements and high aluminum/titanium fraction, these materials, when consolidated through SLM form various secondary phases, which affects the processability
    and leading to weakness within the structure.

  • First, the embodied energy that was used to make the printer, which has more than 500 parts, contributes around 124,000 MJ for a standard Renishaw AM250.

  • Advantage can be gained when producing hybrid forms where solid and partially formed or lattice type geometries can be produced together to create a single object, such as
    a hip stem or acetabular cup or other orthopedic implant where osseointegration is enhanced by the surface geometry.

  • Additionally, certain types of nanoparticles with minimized lattice misfit, similar atomic packing along matched crystallographic planes and thermodynamic stability can be
    introduced into metal powder to serve as grain refinement nucleates to achieve crack-free, equiaxed, fine-grained microstructures.

  • As a new processing technique, SLM can produce a unique microstructure that is difficult to achieve using conventional techniques.

  • The ability to quickly produce a unique part is the most obvious because no special tooling is required and parts can be built in a matter of hours.

  • [19] The future challenges are being unable to create fully dense parts due to the processing of aluminum alloys.

  • [citation needed] Laser polishing by means of shallow surface melting of SLM produced parts is able to reduce surface roughness by use of a fast-moving laser beam providing
    “just enough heat energy to cause melting of the surface peaks.

  • For production tooling, material density of a finished part or insert should be addressed prior to use.

  • For another superalloy Inconel IN718, researchers found the additively manufactured material showed large columnar grains with an orientation parallel to the building direction,
    whereas the wrought material showed a fine-grained structure with no significant texture.

  • Requests such as requiring a quick turnaround in manufacturing material or having specific applications that need complex geometries are common issues that occur in industry.

  • [citation needed] It is critical to have a full overview of the material along with its processing from print to required post-print to be able to finalize the mechanical
    properties for design use.

  • [35] Traditional high-volume manufacturing techniques have a relatively high set-up cost (e.g.

  • [8] SLM machines predominantly uses a high-powered Yb-fiber optic laser with standard laser powers ranging from 100–1000 W. Inside the build chamber area, there is a material
    dispensing platform and a build platform along with a recoater system (blade or roller) used to evenly spread new powder across the build platform.

  • [51] Potential Selective laser melting or additive manufacturing, sometimes referred to as rapid manufacturing or rapid prototyping, is in its infancy with relatively few
    users in comparison to conventional methods such as machining, casting or forging metals, although those that are using the technology have become highly proficient[weasel words].

  • [18] Material Density that is generated during the laser processing parameters can further influence crack behavior such that crack reopening post HIP process is reduced when
    density is increased.

  • Much of the pioneering work with selective laser melting technologies is on lightweight parts for aerospace[34] where traditional manufacturing constraints, such as tooling
    and physical access to surfaces for machining, restrict the design of components.

  • [56][57] Often a direct comparison can only be made by looking at parts made through two different processes.

  • Being able to print very high strength advanced alloys … was crucial to being able to create the SuperDraco engine as it is.

  • Depending on the composition of the precipitates, this effect can remove important elements from the bulk material or even embrittle the printed structure.

  • As a consequence, a wide range of effects might take place like the formation of non-equilibrium phases and changes in the microstructure.

  • However, by planning the build in the machine where most features are built in the x and y axis as the material is laid down, the feature tolerances can be managed well.

  • However, for limited quantise of bespoke customisable parts, the process remains attractive for a number or uses.

  • [citation needed] Machine components The typical components of a SLM machine include: laser source, roller, platform piston, removable build plate, supply powder, supply doses
    (e.g.

  • [12] In order for the material to be used in the process it must exist in atomized form (powder form).

  • Laser-sintering is independent of economies of scale, thus liberating one from focusing on batch size optimization.

  • [citation needed] The ASTM International F42 standards committee has grouped selective laser melting into the category of “laser sintering”, although this is an acknowledged
    misnomer because the process fully melts the metal into a solid homogeneous fully dense mass, unlike selective laser sintering (SLS) which is a true sintering process.

  • For example, the directed laser beam can induce convection currents upon direct impact in a narrow “keyhole” zone or throughout the semi-molten metal that can impact the material’s
    overall composition.

  • [16] Additionally, industry pressure has added more superalloy powders to the available processing including AM108.

  • [37] An EADS study shows that use of the process would reduce materials and waste in aerospace applications.

  • Other factors that are negligible, yet sometimes varied, are: inert gas use, material (powder) waste, materials used, atomization, and disposal of machine components.

 

Works Cited

[‘1. “A Pioneer in Metal 3D Printing”. SLM Solutions Group AG.
2. ^ “DMLS | Direct Metal Laser Sintering | What Is DMLS?”. Atlantic Precision. Archived from the original on 12 August 2018. Retrieved 16 March 2018.
3. ^ “Direct Metal Laser Sintering”.
Xometry.
4. ^ DE 19649865, Meiners, Wilhelm; Wissenbach, Konrad & Gasser, Andres, “Shaped body especially prototype or replacement part production”, published 1998-02-12, assigned to Fraunhofer-Gesellschaft zur Förderung der Angewandten Forschung
eV
5. ^ “DMLS vs SLM 3D Printing for Metal Manufacturing”. Retrieved 15 November 2017.
6. ^ “EBM® Electron Beam Melting – in the forefront of Additive Manufacturing”. Archived from the original on 5 February 2020. Retrieved 15 November 2017.
7. ^
“Direct Metal Laser Sintering DMLS with ProtoLabs.com”. ProtoLabs.
8. ^ Nematollahi, Mohammadreza; Jahadakbar, Ahmadreza; Mahtabi, Mohammad Javad; Elahinia, Mohammad (2019). “Additive manufacturing (AM)”. Metals for Biomedical Devices. pp. 331–353.
doi:10.1016/B978-0-08-102666-3.00012-2. ISBN 978-0-08-102666-3. S2CID 188930610.
9. ^ “How Direct Metal Laser Sintering (DMLS) Really Works”. 3D Printing Blog | i.materialise. 8 July 2016.
10. ^ “An Engineer’s Dream: GE Unveils A Huge 3D Printer
For Metals | GE News”. www.ge.com. Retrieved 18 July 2020.
11. ^ “VELO3D Launches Large Format, 1 Meter Tall Industrial 3D Metal Printer, with Knust-Godwin as First Customer”. www.businesswire.com. 14 April 2020. Retrieved 18 July 2020.
12. ^
Tan, C. (2018). “Selective laser melting of high-performance pure tungsten: parameter design, densification behavior and mechanical properties”. Sci. Technol. Adv. Mater. 19 (1): 370–380. Bibcode:2018STAdM..19..370T. doi:10.1080/14686996.2018.1455154.
PMC 5917440. PMID 29707073.
13. ^ Fayed, Eslam M.; Saadati, Mohammad; Shahriari, Davood; Brailovski, Vladimir; Jahazi, Mohammad; Medraj, Mamoun (21 January 2021). “Effect of homogenization and solution treatments time on the elevated-temperature
mechanical behavior of Inconel 718 fabricated by laser powder bed fusion”. Scientific Reports. 11 (1): 2020. doi:10.1038/s41598-021-81618-5. PMC 7820609. PMID 33479475.
14. ^ “Additive Manufacturing”. Kymera International. Archived from the original
on 18 January 2021. Retrieved 29 October 2019.
15. ^ “EOS Metal Materials for Additive Manufacturing”. www.eos.info.
16. ^ Jump up to:a b c d Manfredi, Diego; Calignano, Flaviana; Krishnan, Manickavasagam; Canali, Riccardo; Ambrosio, Elisa Paola;
Atzeni, Eleonora (2013). “From Powders to Dense Metal Parts: Characterization of a Commercial ALSiMg Alloy Processed through Direct Metal Laser Sintering”. Materials. 6 (3): 856–869. Bibcode:2013Mate….6..856M. doi:10.3390/ma6030856. PMC 5512803.
PMID 28809344.
17. ^ Kuo, Yen-Ling; Horikawa, Shota; Kakehi, Koji (March 2017). “Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing”. Scripta Materialia. 129: 74–78. doi:10.1016/j.scriptamat.2016.10.035.
18. ^
Jia, Qingbo; Gu, Dongdong (February 2014). “Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties”. Journal of Alloys and Compounds. 585: 713–721. doi:10.1016/j.jallcom.2013.09.171.
19. ^
Jump up to:a b c Aboulkhair, Nesma T.; Simonelli, Marco; Parry, Luke; Ashcroft, Ian; Tuck, Christopher; Hague, Richard (December 2019). “3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting”. Progress
in Materials Science. 106: 100578. doi:10.1016/j.pmatsci.2019.100578.
20. ^ Panwisawas, Chinnapat; Tang, Yuanbo T.; Reed, Roger C. (11 May 2020). “Metal 3D printing as a disruptive technology for superalloys”. Nature Communications. 11 (1): 2327.
Bibcode:2020NatCo..11.2327P. doi:10.1038/s41467-020-16188-7. PMC 7214413. PMID 32393778.
21. ^ Zhang, Bi; Li, Yongtao; Bai, Qian (2017). “Defect Formation Mechanisms in Selective Laser Melting: A Review”. Chinese Journal of Mechanical Engineering.
30 (3): 515–527. Bibcode:2017ChJME..30..515Z. doi:10.1007/s10033-017-0121-5. S2CID 34224509.
22. ^ Panwisawas, Chinnapat; Perumal, Bama; Ward, R. Mark; Turner, Nathanael; Turner, Richard P.; Brooks, Jeffery W.; Basoalto, Hector C. (1 March 2017).
“Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys: Experimental and modelling”. Acta Materialia. 126: 251–263. Bibcode:2017AcMat.126..251P. doi:10.1016/j.actamat.2016.12.062. S2CID 55440833.
23. ^
Dubrov, A V; Mirzade, F Kh; Dubrov, V D (December 2019). “On the dendrite growth simulation during multitrack selective laser melting process”. Journal of Physics: Conference Series. 1410 (1): 012026. Bibcode:2019JPhCS1410a2026D. doi:10.1088/1742-6596/1410/1/012026.
24. ^
Martin, Aiden A.; Calta, Nicholas P. (30 April 2019). “Dynamics of pore formation during laser powder bed fusion additive manufacturing”. Nature Communications. 10 (1): 1987. Bibcode:2019NatCo..10.1987M. doi:10.1038/s41467-019-10009-2. PMC 6491446.
PMID 31040270.
25. ^ Bajaj, P.; Hariharan, A.; Kini, A.; Kürnsteiner, P.; Raabe, D.; Jägle, E. A. (20 January 2020). “Steels in additive manufacturing: A review of their microstructure and properties”. Materials Science and Engineering: A. 772:
138633. doi:10.1016/j.msea.2019.138633. hdl:21.11116/0000-0005-9538-4.
26. ^ Niu, H.J; Chang, I.T.H (November 1999). “Instability of scan tracks of selective laser sintering of high speed steel powder”. Scripta Materialia. 41 (11): 1229–1234. doi:10.1016/S1359-6462(99)00276-6.
27. ^
Gu, Dongdong (2015). Laser Additive Manufacturing of High-Performance Materials. Berlin, Heidelberg: Springer. ISBN 9783662460894.
28. ^ Popkova, D S; Ruslanov, I M; Zhilyakov, A Y; Belikov, S V (19 January 2021). “The effect of the selective laser
melting mode on second phases precipitation in 316L steel during subsequent heat treatment”. IOP Conference Series: Materials Science and Engineering. 1029 (1): 012053. Bibcode:2021MS&E.1029a2053P. doi:10.1088/1757-899x/1029/1/012053.
29. ^ Jump
up to:a b Lewandowski, John J.; Seifi, Mohsen (1 July 2016). “Metal Additive Manufacturing: A Review of Mechanical Properties”. Annual Review of Materials Research. 46 (1): 151–186. Bibcode:2016AnRMS..46..151L. doi:10.1146/annurev-matsci-070115-032024.
ISSN 1531-7331.
30. ^ Jump up to:a b Son, Kwang-Tae; Phan, T.Q.; Levine, L.E.; Kim, Kyu-Sik; Lee, Kee-Ahn; Ahlfors, Magnus; Kassner, M.E. (March 2021). “The creep and fracture properties of additively manufactured inconel 625”. Materialia. 15: 101021.
doi:10.1016/j.mtla.2021.101021. S2CID 233859977.
31. ^ Schmiedel, Alexander; Burkhardt, Christina; Henkel, Sebastian; Weidner, Anja; Biermann, Horst (November 2021). “Very High Cycle Fatigue Investigations on the Fatigue Strength of Additive Manufactured
and Conventionally Wrought Inconel 718 at 873 K”. Metals. 11 (11): 1682. doi:10.3390/met11111682. ISSN 2075-4701.
32. ^ Jump up to:a b Ávila Calderón, L.A.; Rehmer, B.; Schriever, S.; Ulbricht, A.; Agudo Jácome, L.; Sommer, K.; Mohr, G.; Skrotzki,
B.; Evans, A. (January 2022). “Creep and creep damage behavior of stainless steel 316L manufactured by laser powder bed fusion”. Materials Science and Engineering: A. 830: 142223. doi:10.1016/j.msea.2021.142223. S2CID 240096090.
33. ^ Mower, Todd
M.; Long, Michael J. (January 2016). “Mechanical behavior of additive manufactured, powder-bed laser-fused materials”. Materials Science and Engineering: A. 651: 198–213. doi:10.1016/j.msea.2015.10.068.
34. ^ Jump up to:a b Larry Greenemeier (9
November 2012). “NASA Plans for 3-D Printing Rocket Engine Parts Could Boost Larger Manufacturing Trend”. Scientific American. Retrieved 13 November 2012.
35. ^ Aboulkhair, Nesma T.; Everitt, Nicola M.; Ashcroft, Ian; Tuck, Chris (October 2014).
“Reducing porosity in AlSi10Mg parts processed by selective laser melting”. Additive Manufacturing. 1–4: 77–86. doi:10.1016/j.addma.2014.08.001.
36. ^ “Additive Companies Run Production Parts”. RapidToday. Retrieved 12 August 2016.
37. ^ Jiayi,
Liu (18 February 2013). “China commercializes 3D printing in aviation”. ZDNet. Retrieved 12 August 2016.
38. ^ “EADS Innovation Works Finds 3D Printing Reduces CO2 by 40%” (PDF). eos.info. Retrieved 14 October 2020.
39. ^ @elonmusk (5 September
2013). “SpaceX SuperDraco inconel rocket chamber w regen cooling jacket emerges from EOS 3D metal printer” (Tweet). Retrieved 12 August 2016 – via Twitter.
40. ^ Norris, Guy (30 May 2014). “SpaceX Unveils ‘Step Change’ Dragon ‘V2′”. Aviation
Week. Archived from the original on 31 May 2014. Retrieved 30 May 2014.
41. ^ Kramer, Miriam (30 May 2014). “SpaceX Unveils Dragon V2 Spaceship, a Manned Space Taxi for Astronauts — Meet Dragon V2: SpaceX’s Manned Space Taxi for Astronaut Trips”.
space.com. Retrieved 30 May 2014.
42. ^ Bergin, Chris (30 May 2014). “SpaceX lifts the lid on the Dragon V2 crew spacecraft”. NASAspaceflight.com. Retrieved 6 March 2015.
43. ^ Heiney, Anna (5 October 2017). “NASA’s Commercial Crew Program Target
Test Flight Dates”. NASA. Retrieved 8 October 2017.
44. ^ Foust, Jeff (30 May 2014). “SpaceX unveils its “21st century spaceship””. NewSpace Journal. Retrieved 6 March 2015.
45. ^ “SpaceX Launches 3D-Printed Part to Space, Creates Printed Engine
Chamber for Crewed Spaceflight”. SpaceX. 31 July 2014. Retrieved 6 March 2015. Compared with a traditionally cast part, a printed [part] has superior strength, ductility, and fracture resistance, with a lower variability in materials properties. …
The chamber is regeneratively cooled and printed in Inconel, a high performance superalloy. Printing the chamber resulted in an order of magnitude reduction in lead-time compared with traditional machining – the path from the initial concept to the
first hotfire was just over three months. During the hotfire test, … the SuperDraco engine was fired in both a launch escape profile and a landing burn profile, successfully throttling between 20% and 100% thrust levels. To date the chamber has
been fired more than 80 times, with more than 300 seconds of hot fire.
46. ^ “FDA clears “first ever” 3D printed spine implant to treat multiple injuries”. 3D Printing Industry. 16 January 2018. Retrieved 6 May 2020.
47. ^ Qin, Yu; Wen, Peng;
Guo, Hui; Xia, Dandan; Zheng, Yufeng; Jauer, Lucas; Poprawe, Reinhart; Voshage, Maximilian; Schleifenbaum, Johannes Henrich (15 October 2019). “Additive manufacturing of biodegradable metals: Current research status and future perspectives”. Acta
Biomaterialia. 10th BIOMETAL2018 – International Symposium on Biodegradable Metals. 98: 3–22. doi:10.1016/j.actbio.2019.04.046. ISSN 1742-7061.
48. ^ Widmann, Tobias; Kreuzer, Lucas P.; Kühnhammer, Matthias; Schmid, Andreas J.; Wiehemeier, Lars;
Jaksch, Sebastian; Frielinghaus, Henrich; Löhmann, Oliver; Schneider, Harald; Hiess, Arno; Klitzing, Regine von (29 April 2021). “Flexible Sample Environment for the Investigation of Soft Matter at the European Spallation Source: Part II—The GISANS
Setup”. Applied Sciences. 11 (9): 4036. doi:10.3390/app11094036. ISSN 2076-3417.
49. ^ “DMLS Applications”. DMLS Technology. Archived from the original on 1 April 2017. Retrieved 16 March 2018.
50. ^ “Direct Metal Laser Sintering”. Stratasys Direct
Manufacturing. Retrieved 10 April 2017.
51. ^ Polish Academy of Sciences (1 September 2022). “Laser melting: Fewer unknowns in the laser nanosynthesis of composites”. Phys.org.
52. ^ “Introduction to 3D printing – additive processes”. 3dexperience.3ds.com.
53. ^
Martin, John H.; Yahata, Brennan D.; Hundley, Jacob M.; Mayer, Justin A.; Schaedler, Tobias A.; Pollock, Tresa M. (21 September 2017). “3D printing of high-strength aluminium alloys”. Nature. 549 (7672): 365–369. Bibcode:2017Natur.549..365M. doi:10.1038/nature23894.
PMID 28933439. S2CID 4460206.
54. ^ Faludi, Jeremy; Baumers, Martin; Maskery, Ian; Hague, Richard (2017). “Environmental Impacts of Selective Laser Melting: Do Printer, Powder, Or Power Dominate?”. Journal of Industrial Ecology. 21 (S1). doi:10.1111/jiec.12528.
ISSN 1088-1980.
55. ^ Broadbent, Clare (1 November 2016). “Steel’s recyclability: demonstrating the benefits of recycling steel to achieve a circular economy”. The International Journal of Life Cycle Assessment. 21 (11): 1658–1665. doi:10.1007/s11367-016-1081-1.
ISSN 1614-7502.
56. ^ Azim, Shakir; Noor, Sahar; Khalid, Qazi Salman; Khan, Aqib Mashood; Pimenov, Danil Yurievich; Ahmad, Imran; Babar, Abdur Rehman; Pruncu, Catalin I. (2020). “Sustainable Manufacturing and Parametric Analysis of Mild Steel Grade
60 by Deploying CNC Milling Machine and Taguchi Method”. Metals. 10 (10): 1303. doi:10.3390/met10101303. ISSN 2075-4701.
57. ^ Jump up to:a b Peng, Tao; Wang, Yanan; Zhu, Yi; Yang, Yang; Yang, Yiran; Tang, Renzhong (1 December 2020). “Life cycle
assessment of selective-laser-melting-produced hydraulic valve body with integrated design and manufacturing optimization: A cradle-to-gate study”. Additive Manufacturing. 36: 101530. doi:10.1016/j.addma.2020.101530. ISSN 2214-8604. S2CID 224907075.
58. ^
Torres-Carrillo, Sharon; Siller, Héctor R.; Vila, Carlos; López, Cecilio; Rodríguez, Ciro A. (10 February 2020). “Environmental analysis of selective laser melting in the manufacturing of aeronautical turbine blades”. Journal of Cleaner Production.
246: 119068. doi:10.1016/j.jclepro.2019.119068. hdl:10251/161696. ISSN 0959-6526. S2CID 211329046.
59. ^ “Aircraft fleet – number of airplanes in service 2021”. Statista. Retrieved 21 November 2022.
60. ^ Salonitis, Konstantinos (2016), Muthu,
Subramanian Senthilkannan; Savalani, Monica Mahesh (eds.), “Energy Efficiency of Metallic Powder Bed Additive Manufacturing Processes”, Handbook of Sustainability in Additive Manufacturing: Volume 2, Environmental Footprints and Eco-design of Products
and Processes, Singapore: Springer, pp. 1–29, doi:10.1007/978-981-10-0606-7_1, ISBN 978-981-10-0606-7, retrieved 21 November 2022
61. ^ Jump up to:a b “Surface Roughness Enhancement of Indirect-SLS Metal Parts by Laser Surface Polishing” (PDF).
University of Texas at Austin. 2001. Archived from the original (PDF) on 4 March 2016. Retrieved 12 October 2015.
62. ^ STL File Conversion. stereolithography.com
63. ^ “Design Guide: Direct Metal Laser Sintering (DMLS)” (PDF). Xometry.
64. ^
EOS GmbH. “EOS M 290 The All-Rounder for 3D Printed Metal Parts”. Retrieved 14 October 2020.
Photo credit: https://www.flickr.com/photos/iagoarchangel/8081530919/’]